SONANCE
S
YMPHONY®
S623LCR SPEAKER
Sonance Symphony® Series
S623LCR Home Theater Speaker
The new Sonance Symphony® S623LCR home theater Installation is quick and easy thanks to the RotoLock®
speaker is a visual and sonic match for our best-selling mounting system. Exclusive FastMount® tabs hold the
Sonance Symphony speaker line.
speaker in the mounting hole during installation, allowing
the installer to let go of it to pick-up tools or other items.
And the S623LCR is designed to fit between standard 16”
on-center studs (the standard stud spacing in the USA).
Incorporating the same drivers as the Symphony S623T
and S623TR but in
a
traditional dual woofer/single
tweeter home theater speaker format, the S623LCR makes
an ideal center-channel counterpart for any Symphony The new Sonance S623LCR is the perfect center-channel
series left and right channel speaker pair in small or match for any Sonance Symphony series speaker pair,
medium-sized home theater systems. And by using the giving dealers and installers all the tools they need to
S623LCR in all three front-channel positions (left, center create exceptional home theater systems in a variety of
and right) and other Symphony series speakers as configurations.
surround channels, an exceptionally high-performance
home theater system can be assembled.
Features:
• Traditional dual woofer/single tweeter home
theater speaker configuration.
Specifications:
Sonance Symphony S623LCR
Tweeter:
Woofer:
1" (25mm) Silk dome, Ferrofluid-
cooled
• Visually and sonically matches other Sonance
Symphony® series speaker models.
• Dual carbon fiber cone woofers produce deep,
powerful bass and provide high-output low-
distortion music and film dialog.
Two 6½" (165mm) Carbon fiber
cones, rubber surrounds
Frequency Response:
Impedance:
43Hz – 20kHz 3dB
• Fits standard 16” on-center stud construction.
• Exclusive new FastMount® tabs hold the speaker in
the mounting hole during installation, allowing the
installer to let go of the speaker to pick-up tools or
other items.
8 ohms nominal; 6 ohms minimum
Power Handling:
5 watts minimum;
135 watts maximum
• The Rotolock® mounting system makes installation
quick and easy.
Sensitivity:
92dB SPL (2.83V/1 meter)
Perforated Aluminum
3dB Tweeter Level
Grille Material:
Adjustments:
• A three position tweeter adjustment switch lets
you balance the speaker’s high-frequency energy
to better complement the room’s setup and
acoustics.
Dimensions (W x H x D):
16" x 8 1/8" x 37/8"
(407mm x 206mm x 98mm)
• Removable IR plug accommodates a Sonance
OptiLinQ® SMR1 or SMR1P IR receiver, allowing
convenient front-of-the-room aiming for system IR
remote controls.
Cutout Dimensions (W x H): 14½" x 6¾" (368mm x 171mm)
Shipping Weight: 7 lbs (3.2kg) each
• Paintable perforated aluminum grille with built-in
scrim cloth.
|
Sharp Car Speaker GX BT3 User Manual
Sherwood Stereo System RX 4503 User Manual
Shindaiwa Pole Saw 63888 94010 User Manual
Sonance Indoor Furnishings Acoustic Damping Material User Manual
Sony Headphones MDR AS40EX User Manual
Sony Microscope Magnifier HDLA1500 User Manual
Sony Portable CD Player CFD W57L User Manual
Sony Radio SRF M75 User Manual
Stow Coffee Grinder SFG10E User Manual
Tannoy Speaker B225 User Manual